Cantilever Traffic Pole tare da Fadada Hannun
Sigar Samfurin
| Abu | Cantilever Traffic Signal Pole tare da hannun tsawo |
| Tsawon sandar ƙarfe | 6500mm |
| Kayan Aiki | Karfe Q235/A36/S400 |
| Diamita na Sama | 160mm |
| Diamita na Tushe | 250mm |
| Kauri na sanda | 8.0mm |
| Rufin foda | tare da |
| Farantin tushe | 600x600mm |
| Kauri na farantin tushe | 20mm |
| Tsawon lokacin da za a isa wurin | mita 8 |
| Diamita na hannun da aka kai | 80mm/160mm |
| Kauri wajen isar da sako | 5.0mm |
| Kauri Farantin Ƙarfafawa | 14mm |
| Girman farantin haɗin kai | 320x320mm |
| Hannu Mai Tsawo | Tsawon 1200mm |
| Girman ƙofofin anga | 24mm |
| Tsawon anga angular | 1600mm |
| Girman ramin bolt | 40*60mm |
| Hanyar maganin saman | An tsoma galvanized mai zafi da foda mai rufi |
Zane na Cantilever Traffic Signal Pole tare da hannun tsawo
Samar da Hotunan Cantilever Traffic Signal Pole
Nuninmu
Tsarin amfani da sandar hasken titi na samarwa
Tambayoyin da ake yawan yi akai-akai
A: An zaɓi kashi 95% na mutane ta hanyar Conical da Octagonal.
A: Tsawon sandar tsayawa daga mita 6 zuwa tsayin mita 6.8
Tsawon hannun da aka yi amfani da shi daga mita 3 zuwa 12
Tsawon hannun da aka bayar ya dogara ne akan adadin layukan da ke da su
A: Ana kuma amfani da sandunan ƙarfe masu siffar tubular a aikace-aikacen zirga-zirga, kamar don tallafawa fitilun zirga-zirga da alamun hanya masu mahimmanci. An tsara su don yin aiki a wurare masu ƙarancin girma da kuma masu girma, sandunan zirga-zirga muhimmin bangare ne na isar da siginar hanya ga direbobi da kuma taimakawa wajen kiyaye kwararar zirga-zirgar kanta.
Baya ga fitilun zirga-zirga, an tsara waɗannan sandunan ne don tallafawa wasu kayan aiki waɗanda ke ba da damar kwararar ababen hawa cikin sauƙi a wuraren da cunkoson ababen hawa ya fi yawa. Waɗannan sun haɗa da kyamarorin zirga-zirga, alamun masu tafiya a ƙasa, alamun gargaɗin gudu, da kuma cantilevers, fitattun abubuwa, da na'urori masu auna ababen hawa.
